UDMTK 5-P/P BU

https://www.phoenixcontact.com/us/products/3101113 Knife disconnect terminal block - UDMTK 5-P/P BU - 3101113 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Knife disconnect terminal block, With test socket screws for insertion of test plugs, Connection type: Screw connection, Cross section: 0.2 mm² - 4 mm², AWG: 24 - 12, Nominal current: 10 A, Nominal voltage: 400 V, Length: 93 mm, Width: 6.2 mm, Color: blue, Assembly: NS 35/7,5, NS 35/15, NS 32 The illustration shows version UDMTK 5-P/P in gray Product Features ■ ■ ■ Space-saving design just 6.2 mm wide Closed housing of double-level terminal blocks User-friendly disconnect knife operation Key Commercial Data Packing unit 1 pc GTIN Weight per Piece (excluding packing) 31.36 g Custom tariff number 85369010 Country of origin Turkey Technical data General Number of levels 2 Number of connections 4 Nominal cross section 4 mm² Color blue Insulating material PA Flammability rating according to UL 94 V2 Rated surge voltage 4 kV 03/15/2016   Page 1 / 4 https://www.phoenixcontact.com/us/products/3101113 Knife disconnect terminal block - UDMTK 5-P/P BU - 3101113 Technical data General Degree of pollution 3 Overvoltage category III Insulating material group I Connection in acc. with standard IEC 60947-7-1 Nominal current IN 10 A Maximum load current 10 A (with 4 mm² conductor cross section) Nominal voltage UN 400 V Open side panel No Dimensions Width 6.2 mm Length 93 mm Height NS 35/7,5 68.5 mm Height NS 35/15 76 mm Height NS 32 73.5 mm Connection data Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 4 mm² Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 4 mm² Conductor cross section AWG min. 24 Conductor cross section AWG max. 12 Conductor cross section flexible, with ferrule without plastic sleeve min. 0.25 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 4 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 0.25 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 2.5 mm² 2 conductors with same cross section, solid min. 0.2 mm² 2 conductors with same cross section, solid max. 1.5 mm² 2 conductors with same cross section, stranded min. 0.2 mm² 2 conductors with same cross section, stranded max. 1.5 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, min. 0.25 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, max. 1.5 mm² 2 conductors with same cross section, stranded, TWIN ferrules with plastic 0.5 mm² sleeve, min. 2 conductors with same cross section, stranded, TWIN ferrules with plastic 2.5 mm² sleeve, max. Connection method Screw connection 03/15/2016   Page 2 / 4 https://www.phoenixcontact.com/us/products/3101113 Knife disconnect terminal block - UDMTK 5-P/P BU - 3101113 Technical data Connection data Stripping length 8 mm Internal cylindrical gage A4 Screw thread M3 Tightening torque, min 0.6 Nm Tightening torque max 0.8 Nm Standards and Regulations Connection in acc. with standard IEC 60947-7-1 IEC 60947-7-1 Flammability rating according to UL 94 V2 Classifications eCl@ss eCl@ss 4.0 27141118 eCl@ss 4.1 27141118 eCl@ss 5.0 27141118 eCl@ss 5.1 27141118 eCl@ss 6.0 27141120 eCl@ss 7.0 27141120 eCl@ss 8.0 27141126 ETIM ETIM 2.0 EC000897 ETIM 3.0 EC000897 ETIM 4.0 EC000897 ETIM 5.0 EC000902 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 Approvals Approvals 03/15/2016   Page 3 / 4 https://www.phoenixcontact.com/us/products/3101113 Knife disconnect terminal block - UDMTK 5-P/P BU - 3101113 Approvals Approvals EAC / EAC Ex Approvals Approvals submitted Approval details EAC  EAC  Drawings Circuit diagram Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 03/15/2016   Page 4 / 4